Integrated Comprehensive Mobile Rapid Test Nucleic Acid Detection Experiment

• Capacity: Four Person
• After-sales Service Provided: Online Technical Support
• Usage: Research Institute, Hospital, School, Company, The Centers for Disease Control and Prevention
• Noise: ≤62DB
• Type: Horizontal Flow Clean Bench
• Power: 380V 80kw
• Model NO.: HRFC-13
• Custom Design Logo: Accept
• Daily Inspection Volume: ≥10000
• Sewage Treatment: Meet Safe Discharge Standards
• Transport Package: Container
• Specification: 13.98*3*3m
• Trademark: minghuiruiyuan
• Origin: Shandong, China
• HS Code: 940320000
• Production Capacity: 100 Pieces/Year

Product Description

Product Description

 

Use in	1.The vast territory which is not conducive to the concentration of personne; 2.Hospitals or CDCS have no space to build laboratories, or the construction cycle is too long;  3.The place where the outbreak is concentrated for easy isolation;  4.The site is not easy to approve or waste resources.
Advantages	1.The integrated mobile container is with relatively high safety, flexibility and emergency response performance; 2.The container is designed with the integrated intelligence and installed in modules and BIM data analysis technology helps to fully utilize the space.
Characteristics	1.It covers an area of less than 53 square meters; 2.Lower requirements on the site: the open ground leveled by cement, with an average load of 350kg, requires less ground strength; 3.Installs quickly on site: only need to connect water and electricity joint. Installation time is less than 2 hours; 4.It is easy to move: it can be loaded and unloaded by forklift or crane, an transported by 17.5 meters semi-trailer.

2.Introduction to the functional zone:

1.Reagent preparation area	The experimental area is mainly used to prepare and sub-package the stored reagents and prepare the main reaction mixture.
2.Sample preparation area	This area is mainly used to store the clinical samples, extract the  nucleic acids (RNA, DNA), store and add the acids in the amplification reaction tube and synthesize CDNA in the RNA measurement process.
3.Amplification analysis area	This area is mainly used to amplify DNA or cDNA. In addition, adding the prepared DNA template and synthesized cDNA (from the sample preparation area) and the preparation of the main reaction mixture (from the reagent storage and preparation areas) into the reaction mixture can be carried out in this area.

Support a variety of specifications customization:
 

 

Product Parameters

Structural Design:

1. The 3mm thick steel frame and 2mm thick steel plate are applied for maintenance. The safe transportation and stable utilization should be considered for every component with the surface rust cleaning and corrosion resistance treatment of the container for the purpose of durable use.

2. The 50mm thick dedicated laboratory purification sheets are used for the walls and top of the container with the fire prevention, heat insulation and antibacterial performance. Closed doors and windows are applied for no gas leakage.

3. The exterior windows are the electrically controlled glass or  the open-type sealed windows to avoid the external  interference to the experimental staff and guarantee the  lighting in the laboratory.  


5.Intelligent Design:
 

 

1. The application of PLC control system, the auto- control of the disinfection system and pressure difference control guarantees the accuracy of the pressure difference and the security in the laboratory.
2. Infrared cameras are set in and surrounding the laboratory to monitor the internal and surrounding conditions at the real-time and guarantee the internal and external safety.
3. 5G network signal source is applied to timely transmit reports, guaranteeing the timeliness.

6.Construction site -ambient requirements:
 

1. Ground	Mortar levelling ground with the length of 20m and width of 6m, better beside the open parking lots or roads, placement of field cranes guaranteed with surrounding warning signs.
2. Water supply and drainage	Municipal drainage tubes nearby with the inlet tube of DN32 and heat preservation measures taken.
3.Main cable	Specifications: 3*50+2*25

Detailed Photos

 

Company Profile

 

Shandong Huirui Medical Technology Co., Ltd. is the wholly owned subsidiary of Huirui (Shandong) Environmental Technology Co., Ltd., which is one of the member units of laboratory construction and design in Shandong Province, a high-tech enterprise specializing in the design, construction, operation and maintenance of the related products to laboratory and purification. The company was established in 2012 and has been dedicated to laboratory and purification field for 9 years. Our company always adheres to the concept of "quality first and continuous innovation" to provide customers with safer, more healthy, energy-saving and humanized solutions as well as timely and thoughtful operation and maintenance service.

We are the professional medical technology company mainly engaged in the R&D, design, manufacture, installation, operation and maintenance ofintegrated multifunctional medical laboratory shelter, medical laboratory equipment, medicallaboratory furnitures, hospital and laboratory purification system, medical equipment andengineering automatic control system, HVAC equipment and other related products.

During the epidemic period in 2020 and 2021, our company immediately responded to the call of the Party and the country, and done our best to research, develop and produce the intergrated mobile container PCR laboratory, fever clinic, nucleic acid testing shelter and related products to response to the outbreak.


 

Our Advantages

 

Packaging & Shipping

 

FAQ

1.Why choose Huirui?

We are the leading manufacturer in medical shelters like the interfrated mobile container PCR laboratory, nucleic acid testing shelter, etc, and other lab equipments, OEM & ODM service are offered.

2. What payment terms do you accept?

T/T, L/C ,D/A, D/P

3.How about your delivery time?

Within 15-30 workdays after receiving deposit.

4.What is the shipping port?
FOB to Qingdao Port, China(also can ship according to customers' request)

5.How to inspect the goods?
Products will be checked by our QC staff first, then our project manager. Client can come and check by themselves or third party check is available.

6.What's your warranty?

One-year warranty period is provided.

7. What should I do if I don't know how to use?
lease do not worry, manual user will be sent together. We provide online training after-sale service, to make sure our customers can operate our instruments skillfully.